> Hi,
>
> Does anyone know the orientation of the smaller ribbon cable that
> connects the
> Doepfer A-160/A-161 Clock Divider/Sequencer together. Mine are
> disconnected and I'm unable to find an online reference. I'd hate
> to incorrectly connect the power rail. Doh!
>
> Thanks :)
Please refer to page 1 of the A-161 user's manual:
"Installation in the rack system:
The A-161 must be positioned directly to the right of the A-160.
Join the two modules with the supplied 10-way ribbon cable. Use the upper
10-way socket on each module.
Make sure that the ribbon cable isnt twisted, and that the colour-coded
section is oriented the same on both modules.
Only join the A-160 to the system bus! Leave the lower 10-way socket on the
A-161 unused."
Pay attention not to damage one of the parts on the boards (especially none
of the transistors). You may bent the transistors a bit (carefully) to plug
on the cable.
Best wishes
Dieter Doepfer