try inputing/outputing a plug into the audio input jack of the exact same step (as the knob) of the bottom row.


 
Bakis


________________________________
From: Janne Gson Berg < tapirkillen@... >
To: doepfer_a100@yahoogroups.com
Sent: Friday, August 24, 2012 4:04 PM
Subject: 1 Troubleshooting A-155


 

Hi everyone!

I have got an A-155 sequencer where one of the pots on the bottom row does not work. At all.

In order to try to pin down the error I have swapped the ICs from the top row to the bottom row ( http://www.doepfer.de/A100_pictures/doepfer_a155.jpg, the two PCBs with the knobs), but the problem was still there. Is there anything else I can do I have also tried to measure resistance what is happening when turning the pot, but I did not see anything that made the offending pot differ from working pots.

Is the pot itself broken, or is there anything else I should try to pin down the problem

Modular regards,

Janne



[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]