> Please help , I received my brand new A-152 from Thomann and it
> arrived with a missing broken part,
>
> PLEASE CHECK THE UPLOADED PHOTO IN THE PHOTO SECTION OF THE GROUP.
>
>
> I wish to replace the part as i don't want to return from Peru
> to Germany. Part is missing (one of tose white squares with a "J"
> on it, solder points still there . As you can see in the photo ,
> there is damaged in the front panel as well , of course the
> problem was bad handling of the package with bad shipping
> protection (no packing material almost) they were loose inside the box.
>
> I marked the missing part with green arrows, one arrow to show
> the empty space (or solder points ) and another arrow to show the
> part that I believe is missing as i compared this module with the
> A-152 from a friend here.
>
>
> Please let me know which part it is and where can i get one I
> want to replace it (i can use the iron solder , and desolder well)
>
> Thanks in advance.
>
> Ricardo

Ricardo, I'm sorry for the troubles. As you already mentioned the module was
not suitable packed for the long journey to Peru.
But I think you may cool down. The broken part is a capacitor which is not
essential for the functioning of the whole module. It's the holding
capacitor for the T&H output #8. Only this output should be affected by the
broken capacitor. The value of the capacitor is 22nF and as soon as it is
replaced even T&H #8 should work. It's a low cost part (less than 0.1 Euro
here in Europe) and I hope you can get it from an electronic shop in your
country. If you cannot find 22n even 10n or 47n will work.

Best wishes
Dieter Doepfer