> hi everyone
>
> this is what i am still (and others) seems to have problems:
>
> when using a midi capable sequencer like the dark time or the mfb
> urzwerg as a bridge
> from midi clock to other analogsequencers it happens that these
> sequencers send out
> 96 step clocks ( 24 a quarter note ) out to the modular. this means
> that the other sequenzers
> at the modular getting really fast clocking as they expect something
> like 16 clocks.
>
> usally i use then one of these sequencer channels just to send a 8
> step gate signal, but with this
> i loose one sequence.
>
> my question is: are there any conferter tool that difides a 96 clock
> to 16 clock with a simple clock
> difider this is not possible because of the triplets in the 96 clock.
> so the difider is something
> like divided by 3 and then divided by 2.
>
> cool would be if the dark time would be switchable of selecting 96
> clock or 16 clock output on the analog sync.
>
> maybe someone knows a solution.
>
> cheers
> felix

The MSY2 can be used to divide the Midi clock (96 clocks per measure) by any
integer value. That way the clock output of the MSY2 can be 96 (same as Midi
or Roland DIN Sync), but also 32 (divide by 3) or 16 (divide by 6) or 8
(divide by 12). We have kind of a modular version of the MSY2 in the holding
pattern (with simultaneous outputs for the most important factors like 96,
32, 16 and 8). But I have no idea when it will be available as there are
some other projects with higher priority (e.g. Dark Energy redesign,
A-192-1, A-190-5, A-157).

As far as I know the Dark Time can output a clock signal that is e.g. 16
clocks per measure. Please ask Christian ( software@... ) to be sure.
The firmware of the Dark Time is improved continuously and I don't know the
detailed current state.

Best wishes
Dieter Doepfer