> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von the_real_dripfeed
> Gesendet: Montag, 23. Januar 2012 13:33
> An: Doepfer_a100@yahoogroups.com
> Betreff: 1 A very small suggestion for Dieter (regarding
> A-100BC cable)
>
>
> Hi Dieter
>
> Perhaps you could make the CV/GATE extension cable (A-100BC) a
> little longer
>
> I built my 6U from your excellent DIY kit and eventually bought
> an A-100BC to extend CV and GATE to the 2nd busboard. But I had
> mounted my two busboards far enough apart in my case that the
> A-100BC cable was about 3 cm too short.
>
> I extended the A-100BC by soldering in an extension, so all is
> well. But I thought that the A-100BC could be maybe 50% longer
> for chumps like me who build their own cases ;-)
>
> Thanks for a great system by the way...loving your new quad VCLFO.

The length of the A-100BC cable adapted to distance between the bus boards
our cases (A-100G6/P6/P9/LC6/LC9 ...). Usually the distance between the bus
boards is in the same range as the front panel height (i.e. about 13 cm). We
assumed that ~20 cm length should be long enough (that the usual lengt for
the A-100BC).

Best wishes
Dieter Doepfer