a-ha, that explains what I've thought when looking at my modules, It
doesn't look that obvious, though.
A downloadable file On their website I've checked a lot of PDF's
out there nut I couldn't find much information...

--- In Doepfer_a100@y..., "jmaddocks1975" <jmaddocks1975@y...> wrote:
> the problem is analogue systems have drilled their holes on the
> modules in a slight different position to doepfer, so you get a gap
> between doepfer and analogue systems modules.
>
> You can buy the rails from Analogue Solutions (don't know what they
> charge), they have a downloadable file about building cases for
> modular systems.
>
> John
>
>
>
>
> --- In Doepfer_a100@y..., "buechlerjoe" <buechlerjoe@t...> wrote:
> > I only have A100 modules, but I was under the impression that the
> > sliding inner rails in the Doepfer mounting rails can easily be
> > adjusted to accomodate the mounting holes in non-Doepfer modules
> > (assuming the entire row is RS Integrator or Concussor modules).
> >
> > It this correct
> >
> > Joe
> >
> > --- In Doepfer_a100@y..., "Paul Schulz" <dasfonk@w...> wrote:
> > > Hey Flamey/ Zameer,
> > >
> > > the incompatibilities between Doe. and ASys is not about the
> > mounting rails, but the rails you screw your modules into the
> frame.
> > They are not part of the mounting rails and have to be bought
> > separately, by the way. For combining ASys and Doepfer you can
cut
> > them into parts, or go the cheaper way: Use nuts which fit the
> module
> > screws and can be put into the mounting rail.
> > >
> > > I´m sorry, but I can´t give any information about the number/
> name
> > of the mounting rails. I checked Conrad´s website
(www.conrad.com)
> > today, but their search engine is crap. But (once again... I
know,
> > guys), check your favorite store for electronic components. The
> better
> > ones offer those rails and other stuff you can make cases of
(like
> > blank faceplates; rails; upper, bottom and side walls).
> > >
> > > Paul
> > >
> > >
> > > ----- Original Message -----
> > > From: flamey101
> > > Subject: 1 Re: Metal blank panels
> > >
> > > ...do you maybe have a model name/number for the mounting
> rails
> > maybe
> > > So I can order that right away
> > >
> > > Also, I currently have both Doepfer (controls) and Analogue
> > Systems
> > > (audio) modules. I've read there are some incopatibilities
> > between
> > > both of the mounting rails (had something to do with the
panel
> > size
> > > or something ), but I can use the same mountingrails for
them
> > > (let's say 1 3U of the case all AS and all of the rest
> Doepfer).
> > >
> > > Greetings, Zameer..
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]