the problem is analogue systems have drilled their holes on the
modules in a slight different position to doepfer, so you get a gap
between doepfer and analogue systems modules.

You can buy the rails from Analogue Solutions (don't know what they
charge), they have a downloadable file about building cases for
modular systems.

John

--- In Doepfer_a100@y..., "buechlerjoe" <buechlerjoe@t...> wrote:
> I only have A100 modules, but I was under the impression that the
> sliding inner rails in the Doepfer mounting rails can easily be
> adjusted to accomodate the mounting holes in non-Doepfer modules
> (assuming the entire row is RS Integrator or Concussor modules).
>
> It this correct
>
> Joe
>
> --- In Doepfer_a100@y..., "Paul Schulz" <dasfonk@w...> wrote:
> > Hey Flamey/ Zameer,
> >
> > the incompatibilities between Doe. and ASys is not about the
> mounting rails, but the rails you screw your modules into the
frame.
> They are not part of the mounting rails and have to be bought
> separately, by the way. For combining ASys and Doepfer you can cut
> them into parts, or go the cheaper way: Use nuts which fit the
module
> screws and can be put into the mounting rail.
> >
> > I´m sorry, but I can´t give any information about the number/
name
> of the mounting rails. I checked Conrad´s website (www.conrad.com)
> today, but their search engine is crap. But (once again... I know,
> guys), check your favorite store for electronic components. The
better
> ones offer those rails and other stuff you can make cases of (like
> blank faceplates; rails; upper, bottom and side walls).
> >
> > Paul
> >
> >
> > ----- Original Message -----
> > From: flamey101
> > Subject: 1 Re: Metal blank panels
> >
> > ...do you maybe have a model name/number for the mounting
rails
> maybe
> > So I can order that right away
> >
> > Also, I currently have both Doepfer (controls) and Analogue
> Systems
> > (audio) modules. I've read there are some incopatibilities
> between
> > both of the mounting rails (had something to do with the panel
> size
> > or something ), but I can use the same mountingrails for them
> > (let's say 1 3U of the case all AS and all of the rest
Doepfer).
> >
> > Greetings, Zameer..
> >
> >
> >
> > [Non-text portions of this message have been removed]