> Hello,
>
> one of the two 12V adapters from my A100DIY2 has a broken pin.
> I've emailed Doepfer for a replacement, but I see that the DIY2
> is discontinued. If I can't get a replacement from Doepfer, I'm
> wondering if I can use any other 12V adapter, or is it important
> to use two exactly the same adapters
>
> thanks
>
> Jilt van Moorst

It's not essential that both adapters are identically. But you have to pay
attention that a stabilized 12V supply is used. Unstabilized supplies have a
noticeable hum noise that will cause problems e.g. with VCOs or VCFs. In
addition the voltage specs of unstabilized supplies are very imprecise as
the actual utput voltage depends upon the load.

Best wishes
Dieter Doepfer