thanks for the reply. the plug had no effect. i pulled the module and noticed a couple of the jacks on the lower row appear to have been chipped/damaged. the jack on step 7 wasn't damaged, but the switch contacts looked to be a bit 'sprung'....i gave them a slight tweak with a needlenose plier to tighten the contact...all is well

--- In Doepfer_a100@yahoogroups.com , Bakis Sirros <synth_freak_2000@...> wrote:
>
> input (and then remove) a patchcord into the input 7 of the bottom row.
> maybe this can 'fix' the cv problem on this step.




> --- On Thu, 6/24/10, Aris <ariscorkos@...> wrote:
>
> From: Aris <ariscorkos@...>
> Subject: 1 a155....no cv on one step
> To: Doepfer_a100@yahoogroups.com
> Date: Thursday, June 24, 2010, 1:56 PM
>
> step 7 of the lower bank is not producing CV. anything in particular i should be looking for before i start poking around