> Thanks, Dieter, for your reply.
>
> So the 177-2 does behave differently from the 177 Because I'm
> using the same footswitch as I did with the 177, and I never had
> this issue with the 177. Are the capacitors different I'm not
> really equipped to do a modification myself....

The circuits of the A-177 and A-177-2 are totally different. The A-177 used
"active" circuits (operational amplifiers), the A-177-2 is a simple passive
module with pull-up resistors for the foot switches only (no capacitors).

> And isn't the behavior I mentioned in my second message quite
> strange I'll quote it again here:
>
> "If I have output #1 from the 177-2 double footswitch patched to
> the 165 trigger modifier input, and nothing patched from output
> #2, only pressing footswitch #1 shows up on the LEDs on the 165.
> Footswitch #2 appears to do nothing. So far so good. However, if
> I patch from the mini-mult of the 165 to the trigger input of the
> S&H 148, then even though only #1 registers on the 165, BOTH
> footswitches #1 and #2 pass gate on to the S&H."

That's indeed strange. I'll try to copy the behaviour in our demo system. It
probably has to do with glitches and bouncing and the different input
behaviour of A-165 and A-148 in case of glitches at the input.

Best wishes
Dieter Doepfer