Does your MT9 output 9 gates (i.e. the output remains high until the
corresponding note off message is transmitted) or only short trigger signals
If gate signals are available the A-150 should do the job. Otherwise A-151
can be used (in this case the state changes with each trigger pulse).

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von Simon
> Gesendet: Dienstag, 20. April 2010 10:48
> An: Doepfer_a100@yahoogroups.com
> Betreff: 1 Re: Can I trigger the CV on the Doepfer A-150
>
>
> I use the A-150 as a gate; audio/CV signal IN1, nothing in IN2,
> audio out I/O.
>
> I know that the A-151 is capable of this - I have one myself -
> but since the A-150 is made of two identical modules, this would
> save me a lot of rack space.
> The thing is that I would need six A-150 instead of twelve A-150!
>
> The MT9 midi-trig from Analogue Solutions can switch between nine
> trigger signals and what is very important, I can make Max/Msp
> switch between the nine triggers in any order I like.
> So with two MT9 and six A-150 it would be possible to have plenty
> of "gates" incorporated in my modular system and only use 44 HP
> of rack space.
> Isn't this the best solution, if the A-150 can be triggered, for
> my system
>
> Best wishes
> Simon
>
>
> --- In Doepfer_a100@yahoogroups.com , <yahoo@...> wrote:
> >
> > > I have tested the Doepfer A- 152, but it doesn't seem to suit
> my needs.
> > > Is it possible to change the CV inputs of the A-150 to a
> trigger input
> > > Or maybe it's too expensive
> > > Thanks
> > > Simon
> >
> > From what you asked for several A-152 should be right solution.
> >
> > Anyway: What should the A-150 trigger input do:
> >
> > a) toggle between the two inputs
> > b) switch to input #2 as long the trigger signal is high
> >
> > Version a) is already available with the A-150. If you want to toggle
> > between 2 inputs the A-151 could be used (limited to 2 steps by
> means of the
> > switch).
> >
> > Best wishes
> > Dieter Doepfer
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>