seems this runs in reverse, when the midi clock is stopped the synced
machine starts and vice versa, this is obviously due to the reset jack
polarity, is it possible to change the reset polarity via the front
panel or midi cc I had a look around the manual and it doesn't seem
to mention it. Anyone have any tips

Paul

On Fri, Feb 12, 2010 at 11:56 PM, phono 1337 < phono1337@... > wrote:
> im out of sync sockets and i've already put plenty of splitters on the
> sync outs (msy2/mc202) so im wondering about using the A-190 clock
> outs as a din sync.
>
> Something like
>
> a190 clock out to pin 3 on the din connector
> a190 reset to pin 1 on the din connector
> a190 ground to pin 2 on the din connector
>
> if i set the reset polarity and clock divisor correct im confident
> this will work, has anyone ever tried this
>
> Paul
>