I agree, this does look like the Modcan 03b (is there also an 03a )

With the 03b, there are switching jacks so that when any individual LFO has it's output in use, that signal is removed from the mix. I think this would be a great feature. The 3-way switch kills the individual output of the LFO entirely (indiv. & mix), I think.

--- In Doepfer_a100@yahoogroups.com , "liamcloyd" <liamcloyd@...> wrote:
>
> has anyone commented on the similarity to the old modcan 03b quad lfo they both look amazing though sadly the modcan is no longer available)!i know the modcan one has a switch which can disable each channel from the mix. i think they were three way switches (1 for two different waveforms and the third position to remove it from the mix). this way there wouldn't quite need to be attenuators for each outs (you could always throw them into a mixer if necessary). anyway, i absolutely cannot wait for this module to be available to the public however it turns out. i would buy it immediately!
>
> liam
>
> --- In Doepfer_a100@yahoogroups.com , "selfoscillate" <synaptic_music@> wrote:
> >
> >
> > hello joost,
> >
> > since almost all inputs on the a100 have attenuators
> > this would not be so useful for the single outs imho,
> > but i agree that pots for adjusting the levels
> > on the sum output would be nice indeed.
> > maybe there is another interesting option
> > by adding an internal pin connector for each
> > lfo output. these could be used for normalling the
> > lfo outputs to the input jacks of an a138 mixer or
> > a138/3 polarizing mixer. would be slightly bigger in size,
> > but the additional mixer could be used for other things too
> > and it would not blow up the size of the a143/4 itself.
> >
> > what i really really really would love to have on the
> > a143/3 are reset-inputs.
> >
> > best wishes
> >
> > ingo
> >
> >
> >
> > --- In Doepfer_a100@yahoogroups.com , "levka0" <levka@> wrote:
> > >
> > > Hi There,
> > > This A-143-4 module looks quite good already, but I have one more
> > > suggestion:
> > >
> > > Why not add a row of four attentuator pots to control the output level
> > > for each osc
> > > Might be handy four both LFO & VCO applications.
> > >
> > >
> > > Best regards,
> > > Joost
> > >
> > > --- In Doepfer_a100@yahoogroups.com , <yahoo@> wrote:
> > > >
> > > > > Hello Henrik
> > > > >
> > > > > > Yes, I totally see your point, if the module is going to have
> > > > > > temperature compensation/be useful as quad VCO.
> > > > > I doubt that. Dieter should speak a word.
> > > >
> > > > So far we have only the version without temperature compensation
> > > working. As soon as we receive the prototype with temperature
> > > compensation I can report on details.
> > > >
> > > > Best wishes
> > > > Dieter Doepfer
> > > >
> > >
> >
>