Pardon if this is a dumb question, but are you sure you're measuring voltage
and not power Is Ohm's law really that blatantly false I've noticed VCOs
don't respond to voltage only; they are influenced by the amperage as well.

On Sun, Nov 15, 2009 at 2:43 PM, Computer Controlled < acidted@... >wrote:

>
>
> That's why there are Buffered Multiples, passive ones drop the voltage
> levels. So they need to be buffered to keep them at original levels.
>
> I just didn't think that the level would drop by so much!
>
>
> Monroe Eskew wrote:
> > It's strange because in theory the voltage should not drop since these
> are
> > parallel circuits-- only the current should change.
> >
> > On Sun, Nov 15, 2009 at 2:16 PM, Computer Controlled < acidted@... <acidted%40gmail.com>
> >wrote:
> >
> >
> >> I've noticed recently that the A-180 Multiple really cuts the voltage
> >> signal down quite substantially. I just got an MFB Dual ADSR and noticed
> >> that when i mult the Gate Output of my SH-101 by 3x, it drops the gate
> >> voltage down to where the MFB won't trigger anymore. Basically, i had it
> >> set up where the gate out went into the A-180, then the first 2 outs
> >> went to the two Gate Ins on the MFB and the 3rd out went to my A-140 EG.
> >> If i pulled the cable out that went to the A-140, the MFB would fire,
> >> but not with it inserted. However, it works if i use my 303, which has a
> >> hotter Gate signal. I checked the gate out voltages coming of the 101
> >> direct, then at each output of the A-180. I got the following:
> >>
> >> Direct Out from 101: 11.56v
> >> Into the A-180 w/no other cables inserted: same as above
> >> with 2 cables inserted: 7v
> >> with 3 cables inserted: 5.5v
> >>
> >> This is quite a bit of voltage drop if you ask me. Is there anyway to
> >> mod the A-180 so it doesn't eat up all my voltages
> >>
> >> -Larry
> >>
> >>
> >>
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>


[Non-text portions of this message have been removed]