Greg,

The Axxe is perfect as a controller for your Doepfer.
The Gate/Trigger/CV outputs are fine, and you can
control the Axxe from your Doepfer as well.


_g

On 22 Apr 2009, at 17:48, Greg Cerveny wrote:

>
>
> Thanks for all the feedback. I didn't think about the volts on the
> 606. Looking it up it appears to be 15.
>
> "Each trigger is a positive 15 Volt, 20 millisecond pulse suitable for
> activating either the Trigger or Gate inputs of most major brands of
> equipment."
>
> Thinking about this, I realized I also have an Arp Axxe that I think I
> could use as a CV/gate source to give it a run. I'll have to research
> the voltage on that as well.
>
> I'm primarily interested in getting this thing to generate some test
> tones. Ultimately, I'll end up driving it with a step sequencer or
> clock/divider/switch thing. It seems it's just a matter of giving all
> my money to Doepfer one chunk at a time.
>
> On Wed, Apr 22, 2009 at 5:56 AM, Keld Sørensen
> < keldsorensen@... > wrote:
> >
> >
> > You were going to write "subtractive" synth signal path - right
> >
> > Keld
> >
> > --- In Doepfer_a100@yahoogroups.com , "Guy Drieghe D." <guy@...>
> wrote:
> >>
> >>
> >> An excellent basic setup, Greg -- a "regular" additive synth signal
> >> path.
> >> It's good that you've opted for voltage controlled EG and LFO;
> gives
> >> you a bit more to play with.
> >>
> >> The 606 outputs +14V triggers, isn't it
> >> Although I think it wouldn't hurt connecting this to the A-141 gate
> >> input, it might be too high for the A-100 system -- better check
> with
> >> Dieter first.
> >>
> >>
> >> Have fun !
> >>
> >> _Guy
> >>
> >>
> >>
> >> On 22 Apr 2009, at 06:02, gregory cerveny wrote:
> >> > I've been picking up modules here and there (some of them from
> this
> >> > board) to build my first modular system. I don't really know what
> >> > I'm doing, but I've been reading through the manufacturer
> >> > descriptions as I scope out pieces.
> >> >
> >> > Right now I have collected:
> >> > a111 VCO
> >> > a120 VCF
> >> > a131 VCA
> >> > a141 VCASDR
> >> > a147 VCLFO
> >> >
> >> > I think this is enough for the unit to make noise. Provided, of
> >> > course, that I pick up a case/power and patch cable set.
> >> >
> >> > I am also wondering if I can use the gate triggers off my
> tr-606 to
> >> > sequence monotone patterns on this setup.
> >> >
> >> > Advice on anything I might be missing or using the tr-606 would
> be
> >> > appreciated.
> >> >
> >> > Thanks!
> >> > Greg
> >> >
> >>