The Interlink FSRs are used in the R2M/A-198 manuals as pressure sensors and
they are very sensitive. Very recommendable.

Dieter Doepfer

> -----Ursprungliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von james.husted@...
> Gesendet: Sonntag, 19. April 2009 19:53
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: 1 Re: tks - for the DIY minded...
>
>
> When looking around at Force Sensing Resistors I found this great info
> sheet from the Interlink folks. Lots of great circuit ideas - Force to
> Current - Force to Voltage - Force to Frequency - Force toggle
> switches etc. Great to get the mind going.
>
> http://www.imagesco.com/sensors/fsr/fsrguide.pdf
>
> -James
>
>
> On Apr 19, 2009, at 10:29 AM, james.husted@... wrote:
>
> >
> >
> > Well I just answered my own question - or Google did at least. Some
> > great hits in the first bit:
> >
> > http://www.ergo-tech.ca/catalog/Force_Sensing_Resistors_19.cfm
> >
> > http://www.tekscan.com/flexiforce/specs-flexiforce.html
> >
> >
> http://www.interlinkelectronics.com/force_sensors/products/forcese
> nsingresistors/standardsensors.html
> >
> > Interlink look like the best looking pieces. Around $5 for the 1.5
> > inch square ones
> >
> > -James
> >
> > On Apr 19, 2009, at 10:21 AM, james.husted@... wrote:
> >
> > >
> > >
> > > Chuck-
> > > Do you know where one can get those Force Sensing Resistors
> > > commercially Those look like the best system to use. No worry about
> > > stray capacitance and I'm sure the touch response is much more
> > > controllable. The outputs could easily be connected to the Serge
> > > "programmer" circuit to add that functionality. They look cooler
> > too.
> > >
> > > -James
> > >
> > > On Apr 19, 2009, at 1:14 AM, hamzzzald wrote:
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>