Okey, I see roughly where it should go now, can you (or anybody else) please
just count the pins and tell me what number it is on Like first from the
bottom of the four in the middle ;)

----- Original Message -----
From: "code_pig" < code_pig@... >
To: < Doepfer_a100@yahoogroups.com >
Sent: Monday, June 17, 2002 6:55 PM
Subject: 1 Re: Sorry kevin


> I've posted a second picture showing the other half of the power
> supply (which should now be the last picture up there). The green
> earth wire goes the case, and then to the power supply itself. I
> think that should do it.
>
> Regards,
> Kevin
>
> --- In Doepfer_a100@y..., "Andreas Lindholm"
> <andreas.k.lindholm@t...> wrote:
> > Ahh, found your picture Kevin, it was on the las page of course. It
> helps,
> > but on the yellow cable it seems that it is just connected to the
> case, is
> > it so Is it just a screw in the case. Then the yellow disappears
> below on
> > your picture... where does the final lead end up
> >
> >
> > ----- Original Message -----
> > From: "code_pig" <code_pig@y...>
> > To: <Doepfer_a100@y...>
> > Sent: Monday, June 17, 2002 5:35 PM
> > Subject: 1 Re: Help guys=)
> >
> >
> > > I don't know if it's any help, but I unloaded a photo to the
> gallery
> > > of the power supply of a G6 I got about 6 weeks ago. It's isn't
> the
> > > best photo, but I think you can see how it is wired.
> > >
> > > Regards,
> > > Kevin
> > >
> > > --- In Doepfer_a100@y..., "Andreas Lindholm"
> > > <andreas.k.lindholm@t...> wrote:
> > > > I bought a new power supply and power switch from doepfer to
> plug
> > > in a few
> > > > extra modules that need extra juice. I figured it would be the
> same
> > > as in my
> > > > old doepfer rack but, no, they have changer power supply, can
> > > anyboy please
> > > > look at yours if you have a new one and inform me what wire goes
> > > where from
> > > > the on/off button to the powersupply since I just can't copy the
> > > old layout
> > > > which hade just one row of three connectors, one blue, one green
> > > and one
> > > > brown. Now I have one blue, one green and one black and a power
> > > supply with
> > > > two rows of of two pairs of connectors. The green cable is also
> > > split in
> > > > two, one connector and one ring.
> > > >
> > > > A little help would be appreciated.
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > doepfer_a100-unsubscribe@y...
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>