Thanks for the reply. I ordered the same exact part from Jameco, and
found a suitable transformer at All electronics. Everything is
working fine, and I'll have a spare transformer. Thanks.

On Tue, Nov 4, 2008 at 10:20 AM, < yahoo@... > wrote:
>> I blew my power transformer (the wallwart part) in the dual buss DIY
>> kit and I was wondering what the proper specs are to look for in a new
>> wallwart/transformer.
>>
>> 15v, 1500ma
>> Regulated or not Anything else I should be aware of
>>
>> -D
>
> The standard transformer is 15V/2500mA AC output (provided that your ordered
> from us directly, otherwise it depends upon the representative in your
> country which transformer has been included).
>
> For other transformers please look at our website: "Even smaller current
> output is possible; the current output of the power supply is half the
> current of the external transformer as the currents for both voltages +/-12V
> are required (if e.g. the transformer outputs max. 1000mA the max. power
> supply current is 500mA)"
>
> Transformers are basically not regulated.
>
> Best wishes
> Dieter Doepfer
>
>