> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von Carlos
> Gesendet: Dienstag, 9. September 2008 22:42
> An: Doepfer_a100@yahoogroups.com
> Betreff: 1 Re: bbd and mini case problem - won't work
>
>
> Hey Doepfer, did you ever check the combo to see if there is indeed a
> problem

I have checked the combo and they work both - but with one mechanical
problem. It's impossible to install both modules at the same time because of
the depth of the modules (so I tested the modules connected to the mini case
but not mounted). The depth of the A-137 is 65 mm, the depth of the A-188-1
is 60 mm. But the useable depth of the mini case is only 50 mm in the left
area (as specified on our web site). In the left area the heat sinks of the
power supply prevent the mechanical assembly of the A-137 or A-188-1. You
probably own the old version of the mini case with the small heat sinks.
Otherwise you would not have been able to install both modules.

As the old version of the mini case had only 100 mA available this may be
the reason of your problems. The A-137 has 40mA, the A-188-1 80mA. That's
120mA altogether.

> also when are the new size mini cased expected

They are already available (from Doepfer, Germany). But you have to ask the
dealer/representative in your country if they have the new version with 32HP
already in stock.

Best wishes
Dieter Doepfer