My A-199 has an awful buzz, i've tried moving it as far away from
the PSU as possible, there's still a buzz, its pretty much useless
at this point because its so bad. So for the Mu-Metal Foil, if you
were to get some of this, where would you put it on the module
would you just wrap the RCA cord in it Thanks! Jon


--- In Doepfer_a100@yahoogroups.com , "thomasborax" <thomasborax@...>
wrote:

>
> ernst-
> as it happened, i never tried the mu metal. i didn't find the price
> prohibitive, since it only required 20$ to do the job, and i did find
> that goofy sheilding company kinda charming, but i did something else
> which turned out pretty easy.
>
> i drilled a hole through the wood strip across the bottom of the
> front panel, cut the rca cable coming from the pc board halfway
> between the board and the jacks, threaded the remaining lenth of
> cable through the hole, screwed the module in, and soldered the jack-
> end of the cable back onto the rest of the cable. whenever i pack up
> the suitcase for a gig, i just unplug the tank (which sits wherever
> away from the psu) and tuck the cable in along with my patch mess and
> close the door.
>
> doesn't answer your question, but if i recall correctly you already
> drilled mults in your wood strip, so you probably wouldn't find
> another hole sacrelige.
>
> ok-tom
>
>
> --- In Doepfer_a100@yahoogroups.com , "Ernst Karel" <eklkrl@g...>
> wrote:
> >
> >
> > Can anyone report on having tried this mu-metal in a suitcase with
> the old power supply
> > Does it completely eliminate the hum
> >
> > thanks,
> > Ernst
> >
> > --- In Doepfer_a100@yahoogroups.com , "thomasborax"
> <thomasborax@y...> wrote:
> > >
> > >
> > > hello-
> > > great link. thx! expensive yes, though the amount needed is
> > > small...who can put a value on a wild reverb sound
> > > --t
> > >
> > >
> > > > Hi Dieter and group
> > > >
> > > > In English is know as mu-metal, and very expensive, you can get
> some
> > > > of them here:
> > > > http://www.lessemf.com/
> > > >
> > > > Best Regards,
> > > >
> > > > Josue.
> >
>