Can't think what else it could be. like I said works perfectly when I
put it back into the rack.

going to try the bbd on its own in the mini case later tonight see if
it works properly, if it does then it will be safe to say than either
the mini case current rating or some of the modules rating is wrong.
if it doesn't then there might be something else that prevents the bbd
module from working in the mini-case...

C.

--- In Doepfer_a100@yahoogroups.com , achtung_999
<heinrich.himmelwasser@...> wrote:

>
> Hello Carlos,
> I don't think the current can be the problem.
> The 188-1 (4096) takes 80mA and the A137 takes 40mA.
> That is 120 mA, well within the range of 200mA that the minicase

powersupply

> delivers...
>
> greetz,
>
> Ernst
>
>
>
>
>
> On Tue, Aug 19, 2008 at 2:41 AM, Carlos <bushwick@...> wrote:
>
> >
> > I have a bbd module ( 4096 stages) I tried putting it in a mini
> > case(beauty case) witha wave multiplier as they fit perfectly
> > together in there but it doesn't seem to work correctly.
> >
> > Basically the clock is not working and it seems to be stuck at a
> > really long delay, and can only get noise out of it instead of the
> > usual thick delay (but can still mix with initial signal)
> >
> > I put it back on my rack and it went to working perfectly.
> >
> > is there a reason/limitation for this module that won't allow it to
> > work well in the mini case
> >
> > or is it simply that when those two modules are together they suck way
> > too much current for the mini case supply
> >
> > C.
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>