good news Dieter. Can I suggest adding VC controlled mix to that module along with VC delay length and VC feedback it would make for a very complex unit. I am using these three modulations in midi form with a digital unit and it is very interesting. I think the memory length switch will work will because it restricts the VC control to a defined area without having to fiddle around scaling the voltage to achieve the same thing - the vesta kaza dig420 I bought off florian works like this and it is very practical - this also has a button which instantly captures whatever is currently in the memory as a loop, which is very nice to be able to do on the fly

are you looking at a modern high quality sound or something more like a dirty 8 bit

Richard

----- Original Message -----
From: hardware@...
To: Doepfer_a100@yahoogroups.com
Sent: Wednesday, August 13, 2008 9:49 AM
Subject: AW: 1 VC controlled delay


> Forgot to add - if looping is what you are after - the site you need
> to scan is Loopersdelight.com - here is their "tools of the trade"
> page: http://www.loopersdelight.com/tools/tools.html
>
> Lots of great boxes there that if they are not Voltage controlled,
> they have pedals or have a knob you can probably Vactorl-ize. Good luck!
>
> -James

The A-189-2 is probably the next derivate of the universal AD/DA system. It
will be probably a voltage controlled digital delay with VC feedback and
additional VCF. The internal structure will be similar to the BBD module
A-188-1 (i.e. an high speed VCO that generates the clock for the digital
delay circuit and a digital delay instead of the BBD). The memory length of
the delay will be probably switcheable in 16 steps between 128 bytes (for
flanger/Karplus Strong) and some Mbytes (for long delays in the range > 10
seconds).

Best wishes
Dieter Doepfer





--
I am using the free version of SPAMfighter for private users.
It has removed 935 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len


[Non-text portions of this message have been removed]