> hello group,
>
> after yesterday evening's failed attempt to tune the doepfer to the
> band, i went searching for the cause this morning, and found it to be
> the a170 slew limiter, which won't give out the same voltage as it
> receives. this applies to both sections of the a170. moreover, the
> tune control on the a110 osc won't go far enough to make up the
> difference. and an octave is no longer an octave anyway, so making up
> the difference wouldn't help.
>
> i assume that this problem is one of design, since both a170s show
> this behaviour. but what are the experiences of other group members
> does someone know of a eurorack slew limiter that tracks accurately
> or does everyone peer over the brass players' shoulder to read a Bb
> part :)
>
> cheers,
>
> stu

If you have an A-185-1 or A-185-2 available please check if the tuning is
correct if you insert the A-185-1/2 buffer between the output of the A-170
and the A-110. In general the lower section of the A-170 cannot be used for
VCO CV applications as mentioned on page 4 of the user's manual.

Best wishes
Dieter Doepfer