ou shit, i was not aware that those 0,01% Resistors are so expensive.
Ok, for Manufacturing it would not be a choice.
I can solder, but have often problems when desoldering.
For myself i could match some 0,1% Rssistors to 0,01% i think
what temperature is the best to desolder Doepfer Boards
a) the old ones
B) the newer ROHS Boards


thanks
H.

--- In Doepfer_a100@yahoogroups.com , <hardware@...> wrote:
>
> > The Module is _very_ useful for me.
> > Matching to 0,01% and paying finally a littlebit more would be the
> > better Deal at the end,
> > IMHO.
> >
> > thanks
> > H.
>
> It would be possible to equip the module with 100k/0,01% mathing
resistors
> but this would increase the price clearly. The price for an 100k/0,01%
> resistor is about Euro 12 for each resistor (e.g.
> http://www.buerklin.com/gruppen/KapE/E072800.asp#m, order no.
35E330). In
> the A-185-2 eight of these resistors are required which would
increase the
> price of the module by at least 100 Euro.
>
> If desired we can order 100k/0.01% resistors and replace the 0.1%
types by
> the 0.01% types.
>
> Best wishes
> Dieter Doepfer
>