"I selling my Nord G3"

you will get good money for that! Its not even on the market yet :)

R

----- Original Message -----
From: James Husted
To: Doepfer_a100@yahoogroups.com
Sent: Wednesday, January 30, 2008 6:43 PM
Subject: Re: 1 Re: Closest module to an EMS Synthi / VCS3 VCO


Axel-
I have two Doepfer portable cabinets and one is devoted to being a
AKS clone. It is a mix of AS and Doepfer. I have gotten really close
to the old AKS sound - in fact it has been so long that the memories
I have of my AKS's sound may be better in my head than the really
were! Anyway I am happy with my setup - it is not as fast as the
matrix on the EMS, and not as clean looking, but there are so many
more modules to choose from that I won't be tired of it very soon. I
selling my Nord G3 to buy more modules soon. I will be looking into
Plan-B soon and a few more AS joysticks will be cool to. The portable
Doepfer cases are VERY sweet and seem more road worthy than the old AKS.
-James

On Jan 30, 2008, at 8:53 AM, Axel Jungkunst wrote:

> Hi James,
> years ago I used two AKS and one VCS3 with DK1 Keyboards, Octave
> Filter
> Bank,
> Octave Divider, Pitch To Voltage Converter and so on....and now I
> apologize to
> have nothing from that all. ;-)
> A simple Synthi A ist too expensive meanwhile.
> But the "EMS" soundscenes I want to build are possible with
> some of my ASys, Doepfer and Plan B modules.
> Not quite 100 %, but for my impression it is near enough to me.
> all the best
> Axel
>
> James Husted schrieb:
>>
>> I used to own two Synthi AKS and a VCS3 - the biggest mistake in my
>> synth buying/selling history was selling them. I have since tried to
>> get the same feeling and function from similar modulars from the
>> different eurorack manufacturers (+40 modules and growing). The main
>> thing I have discovered that made the difference to my patches
>> (mainly raygun-from-mars type sounds) is the large difference in
>> control voltage sensitivity between the EMS and current modules. The
>> EMS's VCO .32V/Oct response makes a ton of difference when a LFO or
>> other CV is modulating. The joystick or LFO can easily sweep the VCO
>> from sub-to-super audio on a AKS for instance. For me the sound of
>> the VCO and VCF can probably be matched closely (at least as closely
>> as AKSs match each other), but as Michael says it is a lot harder to
>> match the way the modules behave together. I'm sure with some
>> modification current offerings would get closer, but straight from
>> the factory they don't match for me. On the other hand current
>> modules stay in tune and work well with each other when all use the
>> same 1 V/Oct so that is a huge benefit.
>>
>> -James
>>
>> On Jan 30, 2008, at 8:03 AM, michaeltritter wrote:
>>
>>>
>>> i have a synthi A and the RS500 and 510. i know that the 500 filter
>>> is supposed to be an
>>> exact rebuild of the synthi filters -- i don't think it quite
>>> matches the behavior, but it's
>>> still pretty good -- but since much of the charm of the synthi for
>>> me is its essential
>>> nastiness, i found that half of getting the synthi vibe out of the
>>> 500 filter module lies less
>>> in what oscillator i ran into it than in overdriving the input (and
>>> output) to distort. the
>>> trapezoid module and a joystick (AS or doepfer) go a long way
>>> toward a nice simulation
>>> (yes also the model 14).
>>>
>>>
>>> --- In Doepfer_a100@yahoogroups.com
>> <mailto:Doepfer_a100%40yahoogroups.com>, Axel Jungkunst <phaedra@...>
>>> wrote:
>>>>
>>>> Hi,
>>>> with the RS95e Oscs you will be as near as possible to the EMS
>>>> sound source,
>>>> but without the RS500e you will have no chance to build the basics
>>>> for
>>>> the typical sound.
>>>> Further I recommend the RS510e Trapezoid Generator and a Plan B
>>>> Model 14
>>>> Dual
>>>> Control Processor.
>>>>
>>>> best regards
>>>> Axel
>>>>
>>>> johnppp2 schrieb:
>>>>>
>>>>> Hi there
>>>>>
>>>>> I'm new here so hello all. I've had a search and read up on the
>>>>> EMS
>>>>> filters and the like but i'm trying to put together my first
>>>>> system,
>>>>> and i'd like to get the closest to the EMS VCO's that i can. Its
>>>>> more
>>>>> the sound than any of the specific features so any suggestions are
>>>>> very welcome. What's out there at the moment
>>>>>
>>>>> thanks
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>





--
I am using the free version of SPAMfighter for private users.
It has removed 267 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len


[Non-text portions of this message have been removed]