A-189-1:
I would like to have voltage control of samplerate and an insert for
an outboard clock source. The extra VCA at the input could be ok, but
not essential.

A-137-2:
To me it seems best to make an expantion module for this, so you can
have the cheap version and if you want more control get the expander
module.

Both these modules demo audio files sound great, I must have them.

By Matijn.

--- In Doepfer_a100@yahoogroups.com , <hardware@...> wrote:
>
> Dear members,
>
> I'm back from NAMM. My Yahoo account has stopped again working during my
> absence. If there were important questions during this time that
have not
> been answered please send them to me again. I'm not sure if I have
time to
> see through all messages of the group during this time.
>
> NAMM visitors were very interested in the new modules and the CV/Gate
> keyboard. There were also some suggestions primarily for the A-137-2
Wave
> Multiplier II and the A-189-1 Bit Modifier:
>
> A-189-1:
> voltage control of Mode (instead of the 16-position rotary switch)
> ext. clock input for the sample rate (instead of the voltage controlled
> sample rate)
> additional VCA at the signal input to modulate the incoming signal
before
> it's processed by the bit modifier
>
> A-137-2:
> output mixer (original + 4 additionally generated signals, in the
prototype
> all signals are mixed with the same level, no level controls)
> offset control for the phase shifts (in the prototype the initial phase
> shift is fixed to 90 degrees)
> single outputs for sawtooth and rectangles (i.e. 8 separate
outputs), maybe
> as an additional 4 HP module that has to be connected to the main module
>
> Tell me what you think and maybe we will start some polls before we
release
> the new modules.
>
> For the CV/Gate keyboard the type of the transpose function has been
> discussed: octave (as it is now) or semitone, maybe we will make it
> adjustable in the config mode (in this mode basic functions like midi
> channel, gate polarity, keybed length and some others are adjusted)
>
> For the other modules (A-138e Quad Triple Crossfader/Mixer/Polarizer,
> A-106-6 XP Filter/Filter Pool, A-132-3 Dual lin/exp VCA, A-134-2 Dual VC
> Crossfader) no or only a few suggestions were made.
>
> Provided that no changes are made all new modules will available
about April
> 2008. If a module has to be redesigned there will be a delay of
about 1-2
> months depending on the extent of the modifications.
>
> The CV/Gate keyboard will be manufactured in February and available
about
> end of February 2008.
>
> Best wishes
> Dieter Doepfer
>