Now I'm confused, so let me tell you excatly what I want to do:
I'm making music for a ballet next year and the overall set-up is;
Laptop running Max/Msp, 16 Channel Mixer, RME Fireface 800 and Adat Converter.
The instruments are: Guitar, Saxophone, Drum set and Keyboard.

The Moogerfooger 251 has a four input mixer, two out ( - & + ) a 4-way multiple,
a lag control, LFO with triangular and Square waveform, two attenuators,
Noise output and a double Sample and Hold function.
The 251 has no audio in or out.

The Moogerfoogers Ring Modulator has a LFO with a sine and square output, rate
and lo/hi frequency can be controlled.

The Moogerfoogers Freqbox has a VCO and four different waveforms to choose from,
env. amount, FM amount and Sync ON/OFF can be controlled.

The Moogerfoogers Analog Delay has delay time, short/long and feedback. Internal or
external loop is also an option.

4 mics from the drums and 1 from the saxophone should go directly into the
Moogerfoogers/Doepfer set-up to avoid latency. The input from the mics needs to be
muted sometimes and the amount comming in, should be controllable.
So first of all I need a Doepfer device that can control 5 audio inputs and send them
on to other devices. What else do I need to make it work
What can of MDI to CV interface would you recommend, A-190, A-191 or MCV 4
I want to be able to control as much as possible!
Thanks once again.
Simon

> >
>