That makes sense IMO.

Jari Jokinen

--- In Doepfer_a100@yahoogroups.com , Christophe Stoelinga
<crashbikedummy@...> wrote:

>
> The old poll question did not work for me. I generally want Doepfer

to make as many modules as possible. But the new question does not
work for my either, as there are some existing modules that I'll buy
first.I have 2 racks of modules, which might be typical for a a100
user but might also be a lot less than average on this list.

>
> I am not sure what question would generate the most useful

feedback. I can think of two, one is a little survey with 3 or so
questions (how exciting is this module, is it function covered by
other modules, would you buy it) or the newly proposed question with
a 5 point answering scale (1= buy it right away, 2 this year, 3 few
years, 4 long future, 5 never) or (1=next module, 2= some other
module first etc.)

>
> Christophe
>
> Bakis Sirros <synth_freak_2000@...>

wrote: hello Dieter,

>
> ok, from now on, the polls will start with "Would you
> Buy..."
>
> best regards,
> Bakis.
>
> --- hardware@... wrote:
>
> > > dear santa,
> > > i know you're snowed under with wish lists, but
> > here's my two cents'
> > > worth of mustard all the same.
> > >
> > > aux send module: one input, four outputs with
> > attenuaters i.e. the
> > > opposite of the a138 that it would closely
> > resemble. i miss such a
> > > module more often than i eat.
> > >
> > > a five way inline attenuater would do it too if
> > put behind a multiple.
> > > that may prove to be a more flexible solution.
> > >
> > > a software-modified version of the a190 midi/cv
> > interface: i'd like to
> > > use outputs cv1 and cv2 to send cv and gate
> > signals from a second midi
> > > channel. since this module would be in addition to
> > the a190 i already
> > > have, it would also be handy to use the
> > clock/reset outputs as a third
> > > cv/gate source. i would glady sacrifice the lfo,
> > glide and
> > > not-yet-available-arpeggiator features if
> > necessary, and having all
> > > three midi channels with the same bend width (for
> > example) would also
> > > be bearable (i'm thinking here of the programming
> > from the front panel).
> > >
> > > simple preamp: a mini jack input, a 6mm jack
> > input, a gain knob and an
> > > output, so a stripped down a119 or 138d in
> > principle. i put so many
> > > audio sources thru my setup, but i don't need half
> > a dozen envelope
> > > followers/gates.
> > >
> > > lfo without range switch: so i can move from slow
> > to fast in one sweep.
> > >
> > > slimmer panels: there are so many 8TE modules that
> > would fit onto 6.
> > > i'm sure i'm not the only suitcase-version-jockey
> > that would welcome
> > > the extra spare space. (personally i'd have no
> > problem with 3,5 and
> > > 7TE panels too, but we'll save that for next
> > year).
> > >
> > > that said, my compliments on all of the goodies
> > that are already in
> > > the sack :)
> > >
> > > cheers,
> > >
> > > stu
> >
> > I spoke to Santa. Most of the suggestions would be
> > no problem in principle.
> > Most of them are simple and not really challenging
> > from the technical point
> > of view. For DIYers no problem (except the A-190
> > software modification).
> > How about polls I'd like to change the polls a
> > bit: "Would you buy ....".
> > The present question "Would you like to release ..."
> > seems to be not the
> > right question. In the past past we had some modules
> > with 70% and more "yes"
> > acceptance but the sales were very poor.
> >
> > Our main problem is to find out if there are really
> > sufficient inquiries
> > (finally it means orders) for a certain module.
> > Otherwise we are not able to
> > keep the prices as low as usual.
> >
> > For the aux send module and the five way inline
> > attenuator I have these
> > comments: This contradicts a bit to the A-100
> > concept with an attenuator at
> > (nearly) each audio and CV input. We decided to add
> > the attenuators at the
> > inputs but not at the outputs (with some exceptions
> > for modules that may be
> > used as the final module like VCA or mixer). And
> > there only very few
> > applications where one would need a separate
> > attenuator in the A-100 (e.g.
> > A-132-1 Dual VCA).
> >
> > 6HP instead of 8HP: The standard module layout (e.g.
> > A-120, A-130, A-138
> > ...) cannot be reduced to 6HP. 6HP are not
> > sufficient to mount a socket next
> > to a rotary knob/potentiometer. Only if the sockets
> > are above or below the
> > knob 6HP are possible.
> >
> > Best wishes
> > Dieter Doepfer
> >
> >
>
> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> 1 group owner
> http://www.parallel-worlds-music.com
> http://www.myspace.com/parallelworldsmusic
> http://www.myspace.com/interconnectedmusic
> http://www.myspace.com/memorygeist
> http://www.DiN.org.uk
> http://www.musicamaximamagnetica.com
> http://www.shimarecords.co.uk
> http://www.rubber.gr
> Athens-Greece
>
> __________________________________________________________
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
>
>
>
>
> ---------------------------------
> Be a better pen pal. Text or chat with friends inside Yahoo! Mail.

See how.

>
> [Non-text portions of this message have been removed]
>