Here's another question for other A-152 users, as I experiment with
this module. Right now I'm using it for the T&H/S&H section. Has
anyone else found that with successive voltage changes, moving from
(for example) address 2 to address 7, that it seems to 'glide' from
2-7 rather than moving discretely from 2 to 7, so that 3-6 get 'hit'
with whatever sampling voltage is being fed I am triggering it with
a ribbon controller, and at first I thought it was the ribbon
controller which was gliding through the intermediate voltages, but
even with another S&H module in line between the ribbon and the 152
(triggered with the gate from the ribbon pressure section), I get this
behavior. Anyone else have this experience

thanks,
Ernst

--- In Doepfer_a100@yahoogroups.com , "ErnstKarel" <ekarel@...> wrote:
>
> Hello -- Thanks Dieter for that response. I'll ask Analogue Haven for
> some of those jumpers -- I have temporarily 'borrowed' a couple of
> jumpers from my A-127 triple filter that unfortunately has been
> crowded out of my suitcases temporarily.
>
> My new problem is this: I put a jumper on the leftmost pair of JP6 on
> the A-152 voltage addressed switch module (according to the directions
> on http://www.doepfer.de/DIY/a100_diy.htm ), and I still get T&H
> rather than S&H. Has anyone else done this mod successfully Am I
> doing something wrong
>
> thanks,
> Ernst
>