--- In Doepfer_a100@yahoogroups.com , Florian Anwander
<Florian.Anwander@...> wrote:

>
> Hi Adam
>
>
> > Hello all. Here's the scenario:
> We read your first posting tooo ;-)
>
>
> > I have two A100P's. Case #1 has a sequencer array [155(2), 154 & 156],
> > the 190 MIDI-CV, and 140 adsr (2). Case #2 has among other things, 3
> > vco's. I have already experienced the tuning problems that suggest I
> > need the 185 buss access. I am bringing in midi clock from the 190

to drive the 154/155's.

> > The question is: do I need one for each case
> > or just one in case #2
> No you do not necessarily need a bus access for the two ADSRs if you

are

> content with patching the gate individually to the ADSRs.
>
> But I have to admit, that I change my module setup every now and then,
> and finally found it useful to have a A185 in each row.
>
> Florian

Florian, thanks.

The adsr's are on the same bus as the 190 so they are already getting
gate signal from the bus when played by MIDI keyboard. However, I've
noticed some intermittent volume drop when sending gate signal from a
155. Can this be due to a fluctuation in gate level I assuming
running the gate out from the 155 to a 185 would even things out
nicely, yes