Hello Simon, even though you might have damaged one or more modules I
don't think this is the reason for the constantly blowing fuses.

Assumed by now all modules are connected correctly I suggest to try
other fuses: "630 - 700 mA time lag (slow blow)". [That info is from
Dopefer's HP -> FAQ.] Make sure they are SLOW BLOW/TIME LAG!

Hope that helps, Ingo

--- In Doepfer_a100@yahoogroups.com , "beakanddune" <beakanddune@...>
wrote:

>
> Hi People,
>
> I know that the topic of fuses has appeared a few times and others
> have experienced similar problems but I'm not sure what to do about
> this. Sorry about the long winded nature of the post but I don't want
> to leave out any prudent info (including details of my own stupidity).
>
> I have an A-100P with a 110v PSU2. I'm in Australia so I'm using a
> stepdown transformer that has a 250 VA rating. The A-100P is half full
> and has been operating for the last month or so without a problem. I
> recently added an A-118 (Noise) and an A-131 (VCA) and had no problems.
>
> The other day I removed a few modules in order to fit the spring from
> my A-199 and when putting the modules back in I accidentally plugged
> my A-112 in incorrectly (I plugged the cable into the bus board
> without plugging it into the left hand row of pins). When I powered
> the unit on the lights came on momentarily and then no power. I then
> realied my error and corrected it but it seems that the fuse in my
> case had also blown. I replaced this with a 500mA time lag fuse and
> this worked fine.
>
> Since then when I power the case on the fuse blows 80% of the time and
> I've just run out of 500mA fuses. :-( Note that 1A fuses seem to
> work fine but I'm aware that these are not recommended.
>
> I'm not sure whether this problem is being caused by :
>
> a. A now 'damaged' A-112 (still seems to work ok).
> b. A damaged PSU2.
> c. Unsuitable fuses.
> d. Some other factor.
>
> Could anyone tell me whether I've likely broken anything and if there
> is anything that could be causing the fuses to blow
>
> Thanks in advance
>
> Simon
>