On 6/19/07, Bakis Sirros < synth_freak_2000@... > wrote:

>
> so, Silas:
> if you are sure what this module should do and what
> features should have, then, please, tell me "exactly"
> what the poll should say.
> then i can create it.
> best regards,
> Bakis.

Hi Bakis,

I'm not a tech writer so please ask if anything below needs clarification.

/Silas

Module Overview: The dual offset generator is designed to provide two CV
offsets. In addition one half can be used as a two channel CV mixer.

Top half: The top half contains one CV input with attenuator/inverter, one
offset knob and one CV output.

JACKS:
In 1 - CV input
Out 1 - CV output

POTS:
In 1 - attenuator/inverter for In 1 CV. Turned fully right it leaves the
signal unattenuated, in the center position it attenuates the signal
completely, and turned fully left the signal is inverted.
Offset - Controls CV offset. Turned fully left the signal is offset by -5
volts, in the center position the signal is left unaffected and turned fully
right the signal is offset by +5V.

Bottom half: The bottom half contains one CV input with attenuator/inverter,
one CV input without attenuator, coarse and fine offset knobs and one CV
output.

JACKS:
In 2a - CV input with attenuator
In 2b - CV input without attenuator - useful for 1V/Octave control voltages
Out 2 - CV output

POTS:
In 2a - attenuator/inverter for In 2a CV. Turned fully right it leaves the
signal unattenuated, in the center position it attenuates the signal
completely, and turned fully left the signal is inverted.
Coarse - Controls CV offset. Turned fully left the signal is offset by -5
volts, in the center position the signal is left unaffected and turned fully
right the signal is offset by +5V.
Fine - Fine control of CV offset. Turned fully left the signal is offset by
-0.5 volts, in the center position the signal is left unaffected and turned
fully right the signal is offset by +0.5V.


[Non-text portions of this message have been removed]