I will see if there is a chance to add another switch to the A-154 but from
the first glance this will be a problem as there is no space at the front
panel left and all port inputs of the microcontroller are used. Maybe a
special control setting (e.g. first step fully clockwise) could be used to
trigger the second reset mode (i.e. immediate reset to step 1).

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von verstaerker
> Gesendet: Mittwoch, 13. Juni 2007 09:37
> An: hardware@...
> Betreff: Re: AW: 1 A-155 - how to start on first step after
> reset
>
>
> i think it's a bit confusing for users that both devices react differently
>
> what about a switch on both devices to switch between both behaviours
>
> > The problem has been solved with the A-154 as controller for
> the A-155. A
> > reset "prepares" the internal logic for the "real" reset. The
> advance to
> > step 1 takes place at the next clock pulse. But we already got some
> > complaints about this behaviour as the people are used to the behaviour
> > where a reset causes an immediate jump to step 1.
> >
> > Best wishes
> > Dieter
> >
> >
> >
> >
> >
>
>
> --
> Mit freundlichen Grüßen
> verstaerker
> mailto: verstaerker@...
>
>
>
>
> Yahoo! Groups Links
>
>
>