Nice find Florian and simple enough, I assume it will work just as well with +/- 12V

Cheers

David

David Salter
Senior Consultant
PSG

Reuters Messaging: david.salter.reuters.com@...
(t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699

Get the latest news at Reuters.com < http://www.reuters.com/ >



________________________________

From: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ] On Behalf Of Florian Anwander
Sent: 04 June 2007 09:48
To: A100
Subject: 1 Re: Suggestion: Re-Amping/DI module



Hi,

on analogue heaven maillist I received the hint, that such a module
already exists in Ken Stones CGS-System:

http://www.cgs.synth.net/modules/cgs60_sba.html < http://www.cgs.synth.net/modules/cgs60_sba.html >

Best regards, Florian

Florian Anwander wrote:

> Hi,
>
> I suggest a Reamping/ext-in/DI-Module (A-119-2 ). What for is it
>
> If you send a line signal from the A-100 to an external guitar stomp box
> effect the line level of the signal will cause the guitar effect to
> distort. Also the output signal of the effect will have wrong impedance
> for the inputs of the moduls. While the second problem mostly might be
> neglectable, the first one will cause distortions in the effects.
>
> Solution: A module which provides two or three functions:
> 1.) Re-Amping - change the impedance to guitar level
> 2.) ext-in - adopt signals with instrument impedance/level to the
> linelevel of the A-100
> 3.) DI - this module could be used perhaps also as real DI-Box
>
> I could also imagine that this module and an additional, more
> sophisticated envelope follower (with controls fo seperated
> up/down-slewrates, threshold, hysteresis settings, and an insert between
> envelope follower and gate follower) may replace the existing A-119.
>
> Florian
>
>

--
Florian Anwander |ConSol
Tel. +49(89)45841-133 |Consulting&Solutions Software GmbH
Fax +49(89)45841-111 |Franziskanerstr. 38, D-81669 München
email: florian.anwander@... <mailto:florian.anwander%40consol.de> | http://www.consol.de < http://www.consol.de >





This email was sent to you by Reuters, the global news and information company.
To find out more about Reuters visit www.about.reuters.com

Any views expressed in this message are those of the individual sender,
except where the sender specifically states them to be the views of Reuters Limited.

Reuters Limited is part of the Reuters Group of companies, of which Reuters Group PLC is the ultimate parent company.
Reuters Group PLC - Registered office address: The Reuters Building, South Colonnade, Canary Wharf, London E14 5EP, United Kingdom
Registered No: 3296375
Registered in England and Wales



[Non-text portions of this message have been removed]