Thanks a lot, Ingo,
I'll try the DIY solution.
Patrick

--- In Doepfer_a100@yahoogroups.com , "ilanode" <techmeier@...> wrote:
>
> Hello Patrick, the 10 pin connectors have 2 rows of identical
contacts:
> 1x -12V; 3x Gnd and 1x +12V per row = 10 pins. The 16 pin connectors
> add to this: 1x 5V; 1x CV (from the bus board); 1x Gate (from the bus
> board)- again per row. I.e. there is no way to get the Gate from the
> bus board to the A141 via a standard 10 pin bus connector.
>
> => Ingo (Selfoscilate) has suggested to take the gate signal from the
> bus to the A141's switch contact of the Gate In jack. However, you'll
> have to do some Do It Yourself - or finde someone who is willing to do
> it for you. If you feel comfortable to solder: It's a quite simple
job.
>
> Necessary technical info:
>
> http://www.doepfer.de/a100_man/a100t_e.htm (pin connector layout.)
>
> http://www.doepfer.de/DIY/a100_diy.htm (To locate the switch contact.)
>
> Amitiés, Ingo
>
> --- In Doepfer_a100@yahoogroups.com , "patate_le_mage" patate.pat@
> wrote:
> >
> > Thanks Ingo,
> > I don't totally understand what you say, my english is not very
good,
> > On the A-141 there is a 10 pin connector instead of a 16 pin as
usual
> > for connection with the bus. Have I to modify the cable or have i to
> > buy one
> > Patrick
> > --- In Doepfer_a100@yahoogroups.com , "selfoscillate"
> > <synaptic_music@> wrote:
> > >
> > > hello patrick,
> > >
> > > yes, it is possible, you just need a customized power cable
> > > (the gate from the bus has to be connected to the switch
> > > contact of the gate input socket, thats all).
> > >
> > > best wishes
> > >
> > > ingo
> > >
> > >
> > >
> > > --- In Doepfer_a100@yahoogroups.com , "patate_le_mage" patate.pat@
> > > wrote:
> > > >
> > > > Hello everybody,
> > > > I've just receive those two modules and i'm surprise they don't
have
> > > > the possibility to take the gate info directly on the bus.
> > > > This can make sens for the A 143.2 which can be use as a
super-Lfo,
> > > > but i don't understand the reason for the A-141 ( there is
probably
> > a
> > > > very good one ). My question is : is it possible for those
modules
> > to
> > > > modify that
> > > > Thank you.
> > > > Patrick
> > > >
> > >
> >
>