impressive reverb, thanks ingo!

On 11 Dec 2006, at 6:48, selfoscillate wrote:

>
> hello all,
>
> here are some stereo examples for the a188/2.
> in the first example a sawtooth wave from an a110
> is used as audio input. in the other two examples
> a roland tr808 pattern is used as audio input.
> the remaining patch is the same on all examples:
> the 3328 stages output is patched to the feedback
> input. on the right channel you hear the mixed outputs
> of the stages 1726, 2790 and 3328.
> on the left channel you hear the mixed and
> inverted outputs of the stages 396, 662 and 1194.
> a sinewave from an a147 is used for modulation of
> the delay time. both mix knobs are set to fully
> clockwise position. no other modules have been used,
> also no clock filtering here.
>
> 1.
> first you hear something like an industrial style sequence
> (lfo frequency knob set to fully clockwise position).
> then the lfo frequency is varied by hand during recording.
> at the very end of the example both mix knobs are set to
> fully counterclockwise position and you can hear the dry
> signal from the a110.
>
> http://www.selfoscillate.de/a100files/a188-2-lfomod1.mp3
>
>
> 2.
> in the following two examples you hear a tr808 instead of
> an a110 sawtooth. again the lfo frequency is varied
> during recording. mix knobs are set to fully clockwise position.
>
> http://www.selfoscillate.de/a100files/a188-2-lfomod2a.mp3
> http://www.selfoscillate.de/a100files/a188-2-lfomod2b.mp3
>
>
> best wishes
>
> ingo
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>