I have to correct my own message. Christian Assall told me that even our
board has a 10 bit ADC available and it will depend upon the software if
only 7 bit (midi standard) or 10 bit are used. Next week I'll have the first
pictures available. But we will offer it as an OEM board only, i.e. not as
an A-100 module. From our experience the inquiries for such a module (like
the A-192) are a bit poor. But it would be no problem to wire the 64 inputs
to an A-100 panel with 64 sockets (e.g. using the 42 HP blind panel).

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von hardware@...
> Gesendet: Donnerstag, 12. Oktober 2006 16:09
> An: Doepfer_a100@yahoogroups.com
> Betreff: AW: 1 CV (via HID device) to mac/pc module
>
>
> We are also prototyping a similar OEM board with 64 inputs but 8 bit
> resolution only (USB and Midi, USB powered or powered by a standard wall
> outlet power supply if USB is not connected). Estimated release
> date: early 2007.
>
> Best wishes
> Dieter Doepfer
>
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von achtung_999
> > Gesendet: Donnerstag, 12. Oktober 2006 14:09
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: 1 CV (via HID device) to mac/pc module
> >
> >
> > Hello group,
> >
> > I haven't been visiting here for a long time.
> > A lot has happened I see! good!
> >
> > A friend of mine is building a module that will be able to
> > convert Doepfer (and other cv
> > sources) to be converted to the computer via a simple HID device.
> > The connection for this
> > will be via USB. The maximum frequency it should pick up will be
> > about 50 Hz.
> > The amount of inputs will be 6. The best thing will be that this
> > will be in 10 bits.
> > So the values it will give you in the computer will be between 0
> > and 1023. (8 times the
> > range of midi!!!)
> >
> > It will make it easy to use for instance Doepfer modules to
> > drive Max/MSP patches (The HI
> > object will immediately recognize the HID device!) and
> > Supercollider patches (an object
> > similar to Max's Hi exists in for supercollider, written by
> > another friend of mine).
> >
> > Examples: Drive Max/MSP with the Doepfer Theremin module,
> > footcontroller, the A149
> > etc. (use your fantasy).
> >
> > My friend is currently working on a prototype and estimates that
> > he will sell this module
> > for about 60 euro's..
> >
> > Let me know what you lot think about this.
> >
> > Thanks,
> >
> > Ernst
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
>
>
> Yahoo! Groups Links
>
>
>
>