hello Dieter Doepfer,

the gate LED does not work...
the cv output does work.
Midi settings are correct (i tried every channel...)
my a-110 is getting voltage from the bus (CV), but my adsr has no jumper (so i don´t
know).
it seems there is no gate-function at all.
clock works as it should.

thanks for the help...
best regards
maise

> Questions for further help:
>
> Does the Gate LED work
> Does the CV output work
> Have you tried to change the Midi channel (of the Midi transmitter or the
> A-190)
> Is the bus connection (CV and Gate) of the A-190 interrupted This is
> required only if another module that accesses the bus is used on the same
> bus board (e.g. A-185)
>
> If the Gate LED and the CV output are working but there is no Gate output
> the module has probably to be repaired (provided that no other module has
> access to same the bus).
>
> Best wishes
> Dieter Doepfer
>
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von maise3000
> > Gesendet: Montag, 9. Oktober 2006 09:42
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: 1 A-190 trouble
> >
> >
> > hello everybody,
> > i have some troubles with my A-190, maybe someone can help me...
> > the problem is:
> > my a-190 doesn´t give any gate information...
> > the clock and the reset function are still working, but there is
> > no other midi-information
> > given to the outputs.
> > is the another way to reset it (not mentioned in the manual-pdf)
> > if not what chip(s) do i have to change
> > any advice would be very helpfull...
> > thanks
> > maise
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>