Does this mean that the Blacet Time Machine is roughly equivalent to the 2048 stage model Their website lists the TM range as from 10 mS to 2 seconds.

Crikey, I guess I'll have to get a whole pile of A-188-1's at some point in the future.

Bryan

>>> hardware@... 08/01/06 3:58 AM >>>

No. The short delay times are not available with the longer BBD circuits.

These are the shortest delay times for the BBD circuits used for A-188-1:

MN3006 (128 stages) @ 200kHz: 0.32 ms
MN3009 (256 stages) @ 200kHz: 0.64 ms
MN3004 (512 stages) @ 200kHz: 1.28 ms
MN3007 (1024 stages) @ 200kHz: 2.56 ms
MN3008 (2048 stages) @ 100kHz: 10.24 ms
MN3005 (4096 stages) @ 100kHz: 20.48 ms

The frequencies (100/200kHz) are the max. clock frequencies of the BBD
circuits specified in the corresponding data sheet. In reality a bit higher
frequencies can be used (e.g. 150 kHz instead of 100 kHz or 300 kHz instead
of 200 kHz) but the short delay times are possible only with the small BBD
circuits as one cannot go beyond a certain clock frequency.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von q v s f u e k p s v
> h s l w
> Gesendet: Montag, 31. Juli 2006 19:49
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: 1 A-188
>
>
> hi folks
> am i right in think A-188-1D with 4096
> stages BBD is capable of everything the rest are (those with
> less stages )
>
> cheers
>
> jack
>
>
> q v s f u e k p s v h s l w < izimizam@... > wrote:
> cheers for the link , i'm guessing doepfer blanking
> panels would be a perfect colour match
>
>
> okiikahuna < okiikahuna@... > wrote:
> I've had great luck with Front Panel Express, here:
> http://www.frontpanelexpress.com/
>
> Just get the measurements from the Doepfer "mechanical details" page,
> stick them into Front Panel Designer, and take some time getting the
> labeling right. Panels come out very similar to Doepfer's and are
> always delivered exactly on time.
>
> The FPE panels I have are slightly lighter in color than most of my
> Doepfers, and I really didn't bother getting the fonts the same,
> since I already have such a hodgepodge of front panel styles on my
> machine.
>
> K.
>
> --- In Doepfer_a100@yahoogroups.com , "izimizam" <izimizam@...> wrote:
>
> > Hi everyone
> >
> > i need some advice on taking some modules i have in
> > eurorack format (but with very dodgy custom painted panels) but i
> want
> > to make the front panels identical to doepfer stylisation , using
> > there font and the same aluminium can anyone advise on the font
> and
> > how i would do this.The modules i have are euro rack and the same
> > voltage but my idea was to remove the old home made panels and
> have
> > some doepfer stylised ones made (so they fit in with my system)
> >
> > Can anyone advise on the process whats the best way to do this ,
> > measure the panels and then convert in something like front panel
> > designer and order them or ordeer blanking panels and diy is
> there
> > one stop solution
> >
> > cheers
> >
> > jack
> >
>
>
> ---------------------------------
> All new Yahoo! Mail "The new Interface is stunning in its
> simplicity and ease of use." - PC Magazine
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> ---------------------------------
> Try the all-new Yahoo! Mail . "The New Version is radically
> easier to use" * The Wall Street Journal
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>