The following Doepfer_a100 poll is now closed. Here are the
final results:


POLL QUESTION: Should Doepfer make a module that features the conversion between voltage based gate signals and switched keycontrol connections.

----General purpose: interface switched gear (like some Moog and Korg synths, footswitch controlers etc.) with voltage based gate gear (like A-100, Roland synths,...)

----Connectors:
- "Gate in tip" (3,5mm)
- "Gate in ring" (3,5mm) connected via socket switch to the inverted signal of "Gate in tip"
- "Gate out" (3,5mm)
- "Switched socket in" (2-poles 6,3mmm)
- "Switched socket out" (3-poles 6,3mmm)
---------------------------------------------
Manual switch:
- "Gate out inverted/not-inverted"
---------------------------------------------
Functions:
- closed connection bewteen tip and shaft of "Switched socket in"
produces logical high signal (10V) at gate out (if manual switch is
set to not-inverted), open connection between tip and shaft of
"Switched socket in" produces logical low signal (10V) at gate out.
- logical high signal (>0.5V) at "gate in tip", nothing connected
to "gate in ring", causes the connection tip/shaft to be closed
and the connection ring/shaft to be opened.
- logical low at "gate in tip" causes the inverted setting of tip/shaft-
and ring/shaft connections.
- inserting a cable to "Gate in ring" causes a separate control for the
ring/shaft conection of "Switched socket out".
-------------------------------------------------
Possible addon:

- real switches (reed-relais) instead of transistor switching for
the "Switched out socket"



CHOICES AND RESULTS
- No, 4 votes, 30.77%
- Yes for the version without the reed-relais addon., 2 votes, 15.38%
- Yes for the version whith the reed-relais addon., 4 votes, 30.77%
- May be, 3 votes, 23.08%



For more information about this group, please visit
http://groups.yahoo.com/group/Doepfer_a100

For help with Yahoo! Groups, please visit
http://help.yahoo.com/help/us/groups/