In principle a modular sequencer with separate units for gate/trigger rows
and CV outputs is not a real challenge for us as it's very similar to the
A-155. But I think it is necessary also to discuss the mechanical solution
for such a sub-system as this the critical part from my point of view. So
far the mechanical construction of the A-100 is based on the 3U height and
all modules are 3U. For separate gate/trigger and CV units we'll need very
long horizontal devices (16 switches, sockets or controls in one row) that
do not fit so far to the mechanical concept of the A-100.

And I hope that nobody expects that each poll with good positive results
will be realized. The number of polls with positive results exceeds our
possibilities by far.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von Bakis Sirros
> Gesendet: Montag, 17. Juli 2006 15:03
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: 1 new module suggestion.
>
>
> hello florian, dieter,
> what about this suggestion
> should i create a poll about a 16 step sequencer in
> two parts(one part for the trigger rows[the three
> position 16 trigger switches] and the second part for
> the cv rows )
> please, tell me the form that the poll should have,
> and if its needed.
> best regards,
> Bakis.
>
>
>
>
> --- Florian Anwander < Florian.Anwander@... >
> wrote:
>
> > Hi
> >
> > > A "Rhythm Sequencer"
> > Yes Yes Yes Yes!!!!
> >
> > But see my suggestions for a modular sequencing
> > system ("ceterum
> > censeo..."):
> > This should not be a trigger sequencer, but a switch
> > sequencer (with
> > DG409).
> >
> > This means for the switch sequencer:
> >
> > Module one:
> > 16 three position switches.
> > Center position is off (pulldown resistor to
> > ground).
> > Upper position is fed by bus, which is fed to a
> > socket, which is
> > normalized to the trigger.
> > Upper position is connected for each switch to a
> > socket. This row of
> > sockets is normalized to a bus, which is fed by
> > socket. This socket
> > again is normalized to a trigger with adjustable
> > gate length.
> >
> > By the usage of normalize sockets you also could
> > switch in sequence
> > between different audio- or CV-signals (not only
> > triggers).
> >
> > Module two:
> > Either A154
> > Or a simplified version of A-154 with
> > - clockgenerator, Tempo
> > - ext. clock in
> > - clock out
> > - clock out Gate length
> > - reset (four switches or one HEX encoder switch)
> > - ext. reset in
> >
> >
> > Module three:
> > similar like module one, but instead of the switches
> > there should be
> > pots, which are connected to the sockets.
> >
> > This system could be a followup to the A-155 (module
> > numbers A-155-1/2/3 )
> >
> > Florian
> >
> >
>
>
> Bakis Sirros - Parallel Worlds
> 1 group owner
> http://www.parallel-worlds-music.com
> http://www.myspace.com/parallelworldsmusic
> http://www.shimarecords.co.uk
> http://www.rubber.gr
> Athens-Greece
>
> __________________________________________________
> Do You Yahoo!
> Tired of spam Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>