Yes, but I'm using a Doepfer cable and plugging the module into one of
the RS-15's Doepfer socket. The socket is keyed, so there's no chance
of plugging the cable in backward.

--- In Doepfer_a100@yahoogroups.com , "ilanode" <techmeier@...> wrote:
>
> Sorry, if this is too easy: Are you aware that ASys and Doepfer are
> using a different pin assignment for their power connecters
>
> --- In Doepfer_a100@yahoogroups.com , "ferlbahoo" <mr.scappy@>
> wrote:
> >
> > Hi Everyone,
> >
> > I purchased a Doepfer A-113 Subharmonic Generator on eBay from
> what I
> > believe is a reliable seller. I plugged the unit into a new
> Analogue
> > Systems RS-15 case (I'll never buy another -- too unpredictable)
> along
> > with some other modules, including a pair of VCAs. Everything
> powered
> > up fine.
> >
> > I plugged a cord from the VCA to my mixer, and the LEDs on the A-
> 113
> > dimmed. (The A-113 was NOT patched to the VCA or any module, for
> that
> > matter.) I plugged another cable to another VCA, and the LEDs
> dimmed
> > even more. Then they went out, never to return.
> >
> > The A-113 doesn't work now. For what it's worth, the VCAs were
> sharing
> > the same power bus with the A-113. A couple of bus fuses blew when
> the
> > A-113 went, but it seems that this didn't protect the A-113 from
> damage.
> >
> > Any ideas what happened Any suggestions on what's wrong with the
> > A-113 I'm truly bummed out.
> >
> > Ferlbahoo
> >
>