Florian,

for all new modules the pcb layout of the sockets has been changed in that
way that only the "active" pin is wired and the "switching" pin is free or
even connected to a solder pin for free wiring (e.g. A-138c).

Dieter

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von Florian Anwander
> Gesendet: Dienstag, 16. Mai 2006 16:51
> An: A100
> Betreff: 1 General suggestion for new modules
>
>
> Hi
>
> The last days I worked a lot with the A100 and tried also to customize
> some modules. From this background and from the lot of new ideas of the
> discussions here in the last week, I'd like to suggest two
> technical things:
>
> 1.) If possible, please always provide two parallel sockets for each
> output. I never have enough multiples. And very often I only want to
> split a connection or simply have a measuring point for a voltmeter or
> oscilloscope.
>
> 2.) the connection traces for sockets on the pcb most times are routed
> that way, that any kind of additional normalling ist not possible (or at
> least requires breaking up the lines, and rewiring them). Until now most
> connections come from the electronics, go to the normalled switch
> contact of the socket and are wired through to the in/output contact of
> the socket.
> It would be much better for any customizing if the connection to the
> electronics are connected only to the in/output contact and the
> normalled swicth contact would be free for additions.
>
>
> thanks
>
> Florian
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>